How to Make Your Own Sauna
How to Make Your Own Sauna
In order to make your own sauna, you will need to purchase the necessary materials and equipment. A sauna is a small wooden room, insulated, and heated. There will be an outward opening door. Your sauna will be heated with a heater, and the rocks will radiate heat throughout the room and into the air. A basic thermostat and ventilation system will control the temperature of the room. If you plan to use a heater, there are several factors to consider.
The first step in building a sauna is to clear the area. Make sure the ground is bare, and there are no large trees or leaves in the area. You can also build a small structure inside an existing structure. After clearing the space, you should cover the structure with a covering. You should overlap the covers so that they stay in place. You can use twine or wire to secure them to the sauna structure. If you're building a larger sauna, you can also hang a window in front of the structure to let in natural light.
Once the sauna structure is complete, you can install the hot rocks. Remember that the rocks should be placed loosely and shouldn't block the air circulation. Place the largest rocks first, and then smaller ones, until you reach the desired height. You should also make sure that the rocks are clean and safe for contact with electrical elements. You should also replace any damaged rocks with new ones, if possible. Once the rocks are in place, they will radiate radiant heat, which permeates your body like soft, permeating steam.
After building the sauna structure, you should place the hot rocks. They should be placed on either side of the sauna structure. If you're using a large structure, it's best to put the rocks in the center. They shouldn't obstruct the airflow or make it difficult for you to get in and out of the sauna. If you're building a small one, you should install benches, which are easier to access.
The next thing you should do is to cover the structure. The hot rocks should be placed so that they will not interfere with air circulation. It's best to place the biggest rocks first, and the smaller ones should follow them. The hot rocks should be loosely placed so that they don't touch the electric elements. Then, you should position the cover so that the water can drip on the rocks. Once the rocks are in place, it's time to place the covers.
After you've chosen a location, you'll need to prepare the area for the sauna. You'll need to clear the area of all debris, including trees and bushes. The soil should be dry and bare. Avoid using leaves as mulch because they're combustible. Aside from the material you're going to use, you'll also need to place a roof over the sauna. If you're using a roof, make sure it's installed well so that the sauna stays dry.
Check Our Products